Trusted Exporter of Industrial Stainless Steel Tubing and pipes
We supply a full range of Stainless Steel Tubing and pipes schedules ranging from Sch 5 thru Double Extra Heavy, we deliver Stainless Steel Tubing and pipes with Exceptional sizes & Quality
Stainless Steel Tubing and pipes
Material: Stainless Steel Pipes & Tubes
Stainless Steel Pipes & Tubes
| Spec. No. | Title | Scope |
|---|---|---|
| ASTM A 213
ASME SA 213 |
Seamless Ferritic Stainless Steel and Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. | Pressure tubes, made from 16 grades of austenitic stainless steel and from 12 grades of ferritic Cr-Mo Alloy Steel. |
| ASTM A 249
ASME SA 249 |
Welded Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. | Pressure tubes, made from austenitic stainless steels, (Types 304, 304H, 304L, 305, 309, 310, 316, 316H, 316L, 317, 321, 321H, 347, 347H, 348, 348H, and XM grades.) |
| ASTM A 268
ASME SA 268 |
Seamless and Welded Ferritic Stainless Steel Tubing for General Service. | 15 grades of ferritic stainless steel tubing for general corrosion resistance and high temperature service. (Types 329, 405, 409, 410, 429, 430, 430Ti, 443, 446, XMs & others). |
| ASTM A 269 | Seamless and Welded Austenitic Stainless Steel Tubing for General Service. | 13 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service. (Types 304, 304L, 316, 316L, 317, 321, 347, 348 and XM grades). |
| ASTM A 270 | Seamless and Welded Austenitic Stainless Steel Sanitary Tubing. | Austenitic stainless steel tubing intended for use in the diary and food industry in sizes up to and including 4 in. in outside diameter. |
| ASTM A 312
ASME SA 312 |
Seamless and Welded Austenitic Stainless Steel Pipe. | Austenitic stainless steel pipe intended for high temperature and general corrosive service. 22 grades are covered. |
| ASTM A 358
ASME SA 358 |
Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service. | For corrosion and high temperature service, normally not less than 8 in. nominal diameter. Types 304, 316, 309, 310, 321, 347, 304L, 316L, 304H, 316H. |
| ASTM A 376
ASME SA 376 |
Seamless Austenitic Stainless Steel Pipe for High-Temp Central-Station Service. | Austenitic stainless steel pipe intended for high temperature and general corrosive service. Better surface than A312 pipe. |
| ASTM A 409
ASME SA 409 |
Welded Large Outside Diameter Light Wall Austenitic Chromium-Nickel Alloy Steel Pipe for Corrosive or High Temperature Service. | Nominal diameter 14-30 in. in Schedules 5S and l0S. Types 304, 309, 310, 316, 317, 321, 347, 348, 304L, 316L. |
| ASTM A 450
ASME SA 450 |
General requirements for Alloy Steel Tubes. | Common requirements for ASTM tubular specifications. |
| ASTM A 511 | Seamless Stainless Steel Mechanical Tubing. | 27 grades are covered for mechanical applications. Primarily round tubing. |
| ASTM A 530
ASME SA 530 |
General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Pipe. | Common requirements for ASTM pipe specifications as listed. |
| ASTM A 554 | Welded Stainless Steel Mechanical Tubing. | Nineteen grades are covered for mechanical applications. Rounds, squares, rectangles, and special shapes are included. |
| ASTM A 632 | Seamless and Welded Austenitic Stainless Steel Tubing for General Service. Small Diameter. | 9 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service. |
| AMS 556 | Steel Tubing, Corrosion and Heat Resistant 18 Cr; 11 Ni; (Cb + Ta) (SAE 30347) Hydraulic. | Annealed type 321 hydraulic line tubing. Type 1-Seamless Type 2-Welded & Drawn |
| AMS 5557 | Steel Tubing, Corrosion and Heat Resistant 18 Cr; 11 Ni; Ti (SAE 30321)Hydraulic | Annealed type 347 hydraulic line tubing. Type 1-Seamless Type 2-Welded & Drawn |
| AMS 5558 | Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr; 11 Ni, (Cb + Ta)(SAE 30348) Thin Wall. | High pressure ducting, wall thickness 2% of O.D. or less. Weld bead controlled, X-ray. |
| AMS 5559 | Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr, 10 Ni, Ti, (SAE 30321) Thin Wall. | High pressure ducting, wall thickness 2% of O.D. or less. Weld bead controlled, X-ray. |
| AMS 5560 | Steel Tubing, Seamless Corrosion Resistant 19 Cr; 9 Ni (SAE 30304). | Annealed type 304 aircraft hydraulic fine tubing. (Not subject to high pressure). Structural. |
| AMS 5561 | Steel Tubing, Welded and Drawn Corrosion Resistant 21 Cr; 6 Ni; 9 Mn High Pressure Hydraulic. | For parts and assemblies such as fluid lines subject to high pressure and requiring corrosion resistance. 1/8 – 1/4 Hard. |
| AMS 5562 | Steel Tubing, Seamless Corrosion Resistant 21 Cr; 6 Ni; 9 Mn Annealed. | Parts and assemblies requiring both corrosion and heat resistance, and having higher strength than 18-8 types. |
| AMS 5565 | Steel Tubing, Welded, Corrosion Resistant 19 Cr; 6 Ni (SAE 30304). | Annealed type 304 aircraft hydraulic line tubing. (Not subject to high pressure), Structural. |
| AMS 5566 | Steel Tubing, Seamless or Welded Corrosion Resistant 19 Cr; 10 N (SAE 30304) High Pressure Hydraulic | Cold drawn type 304, high pressure, aircraft hydraulic line tubing. 1/8 hard.
Type 1óSeamless Type 2óWelded & Drawn |
| AMS 5567 | Steel Tubing, Seamless or Welded Corrosion Resistant 19Cr; 10 Ni (SAE 30304) Hydraulic, Solution Treated. | Fluid lines subject to medium high pressures requiring corrosion resistance. Annealed.(1) Seamless (2) Welded & Drawn |
| AMS 5570 | Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti (SAE 30321). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low. |
| AMS 5571 | Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 11 Ni; (Cb + Ta) (SAE 30347). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low. |
| AMS 5572 | Steel Tubing, Seamless Corrosion and Heat Resistant 25 Cr; 20 Ni (SAE 30310). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when welded during fabrication, Requiring oxidation resistance up to approximately 2000?F, but useful at that temperature only when stresses are low. |
| AMS 5573 | Seamless Type 316 Annealed Structural | Parts & assemblies requirinq,,both corrosion and heat resistance up to 1600?F. |
| AMS 5574 | Seamless Type 309S Annealed Structural | Parts & assemblies requiring both corrosion and heat resistance up to 2000?F, especially welded assemblies. |
| AMS 5575 | Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 11 Ni; (Gb + Ta) (SAE 30347). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low. |
| AMS 5576 | Steel Tubing. Welded, Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti (SAE 30321). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low. |
| AMS 5577 | Steel Tubing, Welded, Corrosion and Heat Resistant 25 Cr; 20 Ni; (SAE 30310). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when welded during fabrication. Requiring oxidation resistance up to approximately 2000?F, but useful at that temperature only when stresses are low. |
| AMS 5639 | Seamless Type 304 | Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability |
| AMS 5645 | Seamless Type 321 | Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability |
| AMS 5546 | Seamless Type 347 | Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability |
| AMS 5647 | Seamless Type 304L | Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability |
| AMS 5648 | Seamless Type 316 | Cold Finished Mechanical Tube Rockwell 90B max Hardness |
| MIL-T-5695 | Tubing, Steel, Corrosion Resistant, (304) Cold Drawn (1/2 or 1/4 Hard) Smls or W&D. | Intended for use in the fabrication of aircraft structural parts requiring a high degree of resistance to corrosion. |
| MIL-T-6737
(T 321) |
Tubing, Steel, Corrosion and Heat Resistant (18-8 Stabilized), Welded.Annealed. | Type 321 and 347 tubing intended for use in the manufactured exhaust-stacks, manifolds, blast tubes, ring collectors and similar applications where a weldable corrosion and heat resisting steel is required or for use at 8000 – 1500?F. |
| MIL-T-6845
(T304) |
Tubing, Steel, Corrosion Resistant (304) Aerospace Vehicle Hydraulic System. 1/8 Hard, Seamless, Welded & Drawn. | Intended for use in high pressure hydraulic and pneumatic systems in which corrosion resistant materials are required. The tubing is not suitable for use in applications assembled by welding or brazing or exposed to temperatures higher than 800?F, because of impaired resistance to corrosion, where subsequent anneal not possible. |
| MIL-T-8504
(T 304) |
Tubing, Steel, Corrosion Resistant (18-8) Annealed, Aircraft Hydraulic System. Seamless, Welded. | Intended for use in high pressure hydraulic and pneumatic systems in which corrosion resistant materials are required. This tubing is of lower strength and higher ductility than tubing to Specification MIL-T-6845. May be used to replace MIL-T-6845 tubing but heavier wall thicknesses must be used:Same qualifications regarding welding, brazing & temperature. |
| MIL-T-8506
(T 304) |
Tubing, Steel, Corrosion Resistant, (304) Annealed, Seamless, Welded. | Intended for use in the fabrication of aircraft parts requiring a high degree of resistance to corrosion. Not to be used in high pressure hydraulic control systems. |
| MILT 8606
(T 304L) (T 321) (T 347) |
Tubing, Steal, Corrosion Resistant (18-8 Stabilized). Annealed. Seamless, Welded & Drawn. | Intended for use in applications which require a high degree of resistance to corrosion or to temperatures in the range of 800?F-1500?F. or in applications which involve welding. Suitble for use in tank-automotive equipment for hydraulic and mechanical applications. |
| MlL-T-8808
(T 321) (T 347) |
Tubing, Steel, Corrosion Resistant (l8-8 Stabilized), Aircraft Hydraulic Quality. Annealed, Seamless, Welded & Drawn. | Intended for use in high pressure hydraulic and pneumatic systems where corrosion and heat resistance are required and in which welding or brazing may be involved during fabrication. Resists oxidation at temperatures to 1200?F, but is useful at that temperature only when stresses are low. |
| MIL-T4973
(T 304L) (T 316L) (T 321) (T 347) |
Tubing, Steel, Corrosion Resistant, Aerospace Vehicle Hydraulic System. 1/8Hard. Seamless, Welded & Drawn. | Intended for use in high pressure hydraulic and pneumatic systems where corrosion and heat resistance are required and in which welding or brazing may be involved during fabrication. Suitable for use in temperatures to 1200?F, when stresses are low. |
| MIL-P-1144
(T 304) (T 304L) (T 316) (T 316L) (T 321) (T 347) |
Pipe, Stainless Steel, (Corrosion Resisting). Seamless or Welded. Annealed. | Pipe is intended for high-temperature and hydraulic br other pressure service under general corrosive conditions. |
Notes:
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes.
Stainless Steel Tubing and pipes packing, Shipping & delivery time:
3 Weeks + Sailing Time
Stainless Steel Tubing and pipes packing (Ready to ship)
[one_half_last]
Stainless Steel Tubing and pipes packing (Ready to ship)
Packing details:
PVC packing, carton packing, or as customer request woodeng case.
Stainless Steel Tubing and pipes have to arrive safely, quickly and without damages at their destination in any part of the world. Packing is also an essential part of quality assurance.
Offer Stainless Steel Tubing and pipes best price
Available Pipe & Tubing Steel Materials:
ASTM A269 Stainless Steel Stainless Steel Tubing and pipes
ASTM A106 Carbon Steel Stainless Steel Tubing and pipes
ASTM A53 Carbon Steel Stainless Steel Tubing and pipes
ASTM B163 Nickel 200 Stainless Steel Tubing and pipes
ASTM B163 Nickel 201 Stainless Steel Tubing and pipes
ASTM B165 Monel 400 Stainless Steel Tubing and pipes
ASTM B164 Monel Stainless Steel Tubing and pipes
ASTM B127 Monel Stainless Steel Tubing and pipes
ASTM B163 Inconel Stainless Steel Tubing and pipes
ASTM B775 Inconel Stainless Steel Tubing and pipes
ASTM B163 Inconel 600 Stainless Steel Tubing and pipes
ASTM B775 Inconel 600 Stainless Steel Tubing and pipes
ASTM B167 Inconel 601 Stainless Steel Tubing and pipes
ASTM B775 Inconel 601 Stainless Steel Tubing and pipes
ASTM B444 Inconel 625 Stainless Steel Tubing and pipes
ASTM B704 Inconel 625 Stainless Steel Tubing and pipes
ASTM B729 Alloy 20 Stainless Steel Tubing and pipes
ASTM B468 Alloy 20 Stainless Steel Tubing and pipes
ASTM B163 Incoloy Stainless Steel Tubing and pipes
ASTM B163 Inconel 800 Stainless Steel Tubing and pipes
ASTM B163 Incoloy 800 Stainless Steel Tubing and pipes
ASTM B515 Inconel 800 Stainless Steel Tubing and pipes
ASTM B515 Incoloy 800 Stainless Steel Tubing and pipes
ASTM B163 Incoloy 800H Stainless Steel Tubing and pipes
ASTM B515 Incoloy 800H Stainless Steel Tubing and pipes
ASTM B163 Incoloy 800HT Stainless Steel Tubing and pipes
ASTM B515 Incoloy 800HT Stainless Steel Tubing and pipes
ASTM B423 Incoloy 825 Stainless Steel Tubing and pipes
ASTM B705 Incoloy 825 Stainless Steel Tubing and pipes
ASTM B622 Hastelloy Stainless Steel Tubing and pipes
ASTM B626 Hastelloy Stainless Steel Tubing and pipes
ASTM B622 Hastelloy C276 Stainless Steel Tubing and pipes
ASTM B626 Hastelloy C276 Stainless Steel Tubing and pipes
ASTM B622 Hastelloy C22 Stainless Steel Tubing and pipes
ASTM B626 Hastelloy C22 Stainless Steel Tubing and pipes
ASTM B622 Hastelloy B2 Stainless Steel Tubing and pipes
ASTM B626 Hastelloy B2 Stainless Steel Tubing and pipes
ASTM A249 254 SMO Stainless Steel Tubing and pipes
ASTM A249 254 SMO Stainless Steel Tubing and pipes
ASTM A574 Alloy Steel Stainless Steel Tubing and pipes
[/one_fourth_last]
Stainless Steel Tubing and pipes Advanced Manufacturing Process:
Top technology in steel pipe manufacturing
Machine processing (interior and exterior)
Stainless Steel Tubing and pipes we export to:
Bahrain, Brazil, Chile, Egypt, India, Iran, Iraq, Kuwait, Lebanon, Middle East, Mexico, Nigeria, Oman, Saudi Arabia, South Africa, South America, Qatar, Russia, Turkey, United States, UAE, Venezuela, Yemen & around the globe.
SAUDI ARAMCO APPROVED PIPES TUBES
|
|
 |
 |
 |
The special and highly preferable features of our products such as excellent quality, high tensile strength, good resistance to corrosion and rust, very high durability, exceptional finishing and incredible resistance to stain has led to immense demand of our products especially in the industries of the cities of Saudi Arabia like Al Bahah, Buq a, Dammam, Dhahran, Dhurma, Dahaban, Diriyah. Above all our product are very ideally priced hence are high preferred in the international market.
|
|
Vishal Steel maintains a project level seamless pipe inventory in numerous material grades in sizes – 20″ & maintains a project level welded pipe inventory in numerous material grades in sizes through 60″. We also stock a significant seamless tubing inventory across many wall dimensions and material grades.
In addition to commodity wall sizes, Vishal Steel also stocks schedule 5S, 20, 120, 160 and XXH size wall thickness. Vishal Steel will gladly perform any special services that you may require such as cut to length, threading, grooving, etc.
Our diverse inventory consists of sourcing that is domestic, approved manufacturers list, and globally competitively produced products.
Stockist, dealers & distributors of:
| BGH Edelstahl | |
| Jindal India | Mukand Steel Ltd |
| Jindal Pipes Limited | Allegheny Technologies Incorporated -ATI |
| Tata Tubes | |
| Tata Structura | |
| Maharashtra Seamless Ltd | |
| Jindal Saw Ltd. | |
| Jindal Stainless Limited | |
| Nippon Steel Pipes Sumitomo Metals Pipes |
